Samsung AC RNNDKG Series - Page 29

29
Installation Procedure
English
Example: When installing DPM (1 Outdoor unit with 4 indoor units)
Condition SEG14 Setting
Result
External control Level control Indoor 1 Indoor 2 Indoor 3 Indoor 4
Default
Not set (0) Slave (All)
Disuse Use
4 Not set (0) Not set (0) Not set (0)
Master (Indoor 1), Slave
(Indoor 2,3,4)
Use (Indoor 3) Disuse
Not set (0) Not set (0) 1~3 Not set (0) Slave (All)
Use (Indoor 4) Use
Not set (0) Not set (0) Not set (0) 5~7
Master (Indoor 4), Slave
(Indoor 1,2,3)
Changing the addresses and options individually
When you want to change the value of a specific option, refer to the following table and follow the steps in Common
steps for setting the addresses and options on page 18.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Function Page Mode
Option mode to
change
Tens position of the
option number
Units position of
the option number
New value
Indication
and details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0 D
Option
type
0 to F
Tens
position
value
0 to 9
Units
position
value
0 to 9
New
value
0 to F
Example: Changing the Buzzer control (SEG17) option of the installation options to 1 disuse.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Function Page Mode
Option mode to
change
Tens position
of the option
number
Units position
of the option
number
New value
Indication 0 D 2 1 7 1
CAC R-32_Mini 4way_IM_DB68-08129A-00_EN_20181115.indd 29 2018/11/15 13:49:34