To Next PageTo Next PageWhat to do if Samsung AC BXAP G Air Conditioner has IPM over heat error on inverter 1?
If your Samsung Air Conditioner experiences an IPM over heat error on inverter 1, check the Outdoor Inverter PBA.
What to do if my Samsung AC BXAP G Air Conditioner shows IPM Over Current (O.C)?
If your Samsung Air Conditioner's IPM is experiencing over current, verify that the service valve is open and check the state of the refrigerant. Also, ensure that the connecting wire and the pipe are in good condition, and inspect the compressor.
What to do if Samsung AC BXAP G displays DC-Link voltage under or over error?
If your Samsung Air Conditioner displays a DC-Link voltage under/over error, check both the AC power and the DC Link Voltage.
What to do if Samsung AC BXAP G shows over current trip or PFC over current error?
If your Samsung Air Conditioner is showing an over current trip or PFC over current error, you should check the OLP sensor.
Why is cooling operation restricted at outdoor temperature below Tcool_low value (default:0°C) in Samsung Air Conditioner?
If your Samsung Air Conditioner is not cooling because the outdoor temperature is too low, check the range of temperature limited for cooling operation and the outdoor temperature sensor.
Why is heating operation restricted at outdoor temperature over Theat_high value (default:30°C) in Samsung AC BXAP G?
If your Samsung Air Conditioner's heating operation is restricted due to high outdoor temperature, check the range of temperature limited for heating operation. Also, check the outdoor temperature sensor.
What to do if Samsung AC BXAP G shows error due to mismatching indoor and outdoor unit?
If your Samsung Air Conditioner is showing an error due to mismatching indoor and outdoor unit, check the outdoor EEPROM data and indoor option code.
What to do if Samsung AC BXAP G has DC-Link voltage under/over error?
Check AC Power and DC Link Voltage.
What to do if Samsung AC BXAP G has inverter input voltage sensor error?
If your Samsung Air Conditioner has an inverter input voltage sensor error, check the Outdoor Inverter PBA.
What to do if my Samsung AC BXAP G displays a PFC Overload (Over current) Error?
If your Samsung Air Conditioner displays a PFC Overload (Over current) Error, check the Outdoor Inverter PBA.
General| Brand | Samsung |
|---|---|
| Model | AC BXAP G Series |
| Category | Air Conditioner |
| Language | English |
Highlights essential safety precautions related to the power supply line, fuses, and circuit breakers.
Guides on selecting an appropriate installation location for the outdoor and indoor units, considering environmental factors and clearances.
Procedure for connecting the main power cable, communication cable, and controllers to the outdoor unit.
Detailed wiring diagrams and precautions for connecting the main power cable for 1-phase and 3-phase systems.
Provides maximum allowable lengths for refrigerant pipes based on installation type and model.
Procedure for connecting pipes, vacuuming the system, and purging air to prevent damage and ensure performance.
Precautions and procedures for adding R-32 refrigerant, including essential requirements for safe charging.
Details procedures for performing gas leak tests using nitrogen before opening valves and R-32 after opening valves.
Procedure for ensuring proper earthing, including selecting an electrode and connecting the earthing wire.
Covers final checks of power supply, connections, and trial operation procedures, including inverter fault indications.
Detailed procedure for pumping down refrigerant before disconnecting pipes to prevent loss and explosion risk.
Procedure for performing gas leak tests on the refrigerant circuit during repair work, emphasizing safety.
Lists self-diagnostic routines and error codes displayed on the outdoor unit PCB, with meanings and remarks.
