Need help?Do you have a question about the Samsung AC BNNDCH Series and is the answer not in the manual?
General| Brand | Samsung |
|---|---|
| Model | AC BNNDCH Series |
| Category | Air Conditioner |
| Language | English |
Specific warning regarding cancer and reproductive harm as per California law.
Essential safety guidelines for handling and installing the air conditioner unit.
Guidelines for safe electrical connections, circuit breakers, grounding, and wiring practices.
Verifying and preparing all supplied accessories before starting the installation process.
Criteria and locations to avoid when choosing a suitable place for the indoor unit.
Specifies the minimum clearance and spacing needed around the indoor unit for installation.
Instructions for adding extra insulation to the indoor unit body under specific environmental conditions.
Detailed steps for securely mounting the indoor unit to the ceiling using suspension bolts.
Procedure to remove factory-charged inert gas from the indoor unit before piping connection.
Guidelines and techniques for correctly cutting and flaring refrigerant pipes for connection.
How to connect the assembly pipes to the refrigerant pipes, including torque specifications.
Pressure testing the refrigerant system with nitrogen to detect leaks before system operation.
Proper methods for insulating refrigerant pipes to prevent condensation and ensure efficiency.
Instructions for installing the drain hose and piping to ensure proper water drainage.
Procedures to perform a leak and drainage test on the installed system.
Detailed steps for connecting the power and communication cables between indoor and outdoor units.
Guide for extending the power cable, including tools and procedures.
Configuration for the Emergency Temperature Output function for multi-system units.
How to use the remote controller to check Wi-Fi setup and connection status.
General steps for setting indoor unit addresses and installation options using the remote control.
Procedures for assigning unique addresses to each indoor unit for system configuration.
Method for setting multiple installation options for indoor units simultaneously.
How to change specific installation options individually for indoor units.
To Next Page