Why does my Samsung Air Conditioner show a communication error between indoor and outdoor units?
If your Samsung Air Conditioner shows a communication error between the indoor and outdoor units, especially after the initial power supply, the suggested solution is to check the indoor quantity setting in the outdoor unit. This error may be due to a communication tracking failure.
What to do if there is a communication error between indoor unit and outdoor unit in Samsung AC MXAD?
If your Samsung Air Conditioner is experiencing a communication error between the indoor and outdoor unit, the suggested solution is to check the electrical connections and settings between them.
How to troubleshoot an indoor fan error on a Samsung Air Conditioner?
If you're encountering an indoor fan error with your Samsung Air Conditioner, you should check the indoor fan operation.
What to do if Samsung Air Conditioner shows error on outdoor temperature sensor?
If your Samsung Air Conditioner displays an error related to the outdoor temperature sensor, the suggested solution is to check the outdoor sensor for open or short circuits.
What to do if Samsung AC MXAD shows error on outdoor COND OUT sensor?
If your Samsung Air Conditioner displays an error related to the outdoor COND OUT sensor, the suggested solution is to check the Cond-Out sensor for open or short circuits.
What to do if Samsung Air Conditioner shows error on discharge temperature sensor of compressor 1?
If your Samsung Air Conditioner displays an error related to the discharge temperature sensor of compressor 1, the suggested solution is to check the discharge sensor for open or short circuits.
What to do if Samsung AC MXAD Air Conditioner shows error on OLP sensor?
If your Samsung Air Conditioner displays an error related to the OLP sensor, the suggested solution is to check the OLP sensor for open or short circuits.
General| Brand | Samsung |
|---|---|
| Model | AC MXAD Series |
| Category | Air Conditioner |
| Language | English |
Guidelines for connecting refrigerant pipes, including length limits and pipe specifications.
Steps to properly connect system pipes and evacuate air from the refrigerant circuit.
Detailed procedure for charging the system with the correct amount of R-410A refrigerant.
Procedures for conducting leak tests using nitrogen and R-410A to ensure system integrity.
Steps for performing final checks, trial operation, and resetting unit settings.
A list of error codes, their meanings, and recommended troubleshooting steps or remarks.
To Next Page