Disassembly and Reassembly
Samsung Electronics 3-67
No Parts Procedure Remark
2 CONTROL-IN
3) Rotate CASE PCB 90 degrees as
shown in figures.
(Watch out for damage of hinge in
CASE PCB)
4) Separate Fan Moter wire as shown in
figures.
Caution:
When you separate the connector, pull
pressing the locking button.
5) Separate Blade Moter wire as shown
in figures.
Caution:
When you separate the connector, pull
pressing the locking button.
6) Cut off the Cable Tie tied up wires.
To Next Page
Loading...
