3-12 Samsung Electronics
No Parts
Procedure Remark
2
TRAY DRAIN
1) Loosen stepping motor wire and detach the
hook of main frame.
2) To detach TRAY-DRAIN from the main frame, pull
the bottom of the TRAY-DRAIN towards you.
3) To detach TRAY-DRAIN from the main frame ,
pull the bottom of the TRAY-DRAIN towards you.
3
CONTROL IN
1) Unfasten the earth screw.(use + ScrewDriver)
2) Detach the temperature sensor and Humidity
sensor.
3) Detach the temperature sensor.
To Next Page
Loading...
