Disassembly and Reassembly
3-80 Samsung Electronics
No Parts Procedure Remark
1 FRONT VIEW
1) Stop the operation of the air condi-
tioner
and disconnect the main power sup-
ply.
2 Control-BOX
1) Loosen 11 of the front screw(CCW) and
detach the Cabinet Front Up.
2) Disconnect the Connector Wire that is
connected to the indoor unit's PBA
3) Unscrew the 1 fixed screws on middle
of the PBA and 4 fixed PBA HOLDER,
and disassemble the PBA from the
indoor unit.
(Use + Screw Driver)
■ MPAH : AC***BNZDCH, AC***KNZDCH
To Next Page
Loading...
