Disassembly and Reassembly
Samsung Electronics 3-87
No. Parts Procedure
Remark
2 Fan & Motor 2) Detach the Fan Propeller.
3) Loosen 4 fixing screws to detach the
Motor. (Use Monkey Spanner.)
4) Disconnect the wire betweenAss’y
Control Out and Motor.
5) Loosen fixing bolts and detach the
Bracket Motor
3 Base Heater 1) Loosen fixing screw and deatach the
Base Heater
4 Assy Control
Out
1) To remove the Cover control box : Pull
the motor wire to allow
sufficient space as shown on the right
side and then remove the screw.
To Next Page
Loading...
