Samsung AC024BXADCH - Page 109

Disassembly and Reassembly
3-56 Samsung Electronics
No Parts Procedure Remark
3 Motor & Blower 1) Disconnect the motor wire.
2) Disassemble the 1 Bracket Motor and
2 Holder Motors.
- Unscrew 2 screws.
3) After disassembling the Motor and
Blower for the set, disassemble the
Blower by use of 3mm wrench.
4) Disassemble the 3 Case Blower Top.
- Unscrew 6 screws.
5) Disassemble the Bracket Motor.
- Unscrew 6 screws.
6) Disassemble the 3 Case Blower Out.
- Unscrew 6 screws.