Disassembly and Reassembly
3-76 Samsung Electronics
No Parts Procedure Remark
3) Loosen the EVA IN/OUT connector. (CN403)
Caution
When you separate the connector,
pull pressing the locking button.
4) Loosen the Humidity sensor connector
(CN401).
→ Option connector.
Caution
The terminal is locking type.
So, when you separate terminals, pull
pressing the button.
5) Loosen the DISPLAY connector.
(CN501).
Caution
The terminal is locking type.
So, when you separate terminals, pull
pressing the button.
6) Loosen the POWER connector.
Caution
When you separate the connector,
pull pressing the locking button.
To Next Page
Loading...
