Samsung AC024BXADCH - Page 152

Disassembly and Reassembly
Samsung Electronics 3-99
No. Parts Procedure Remark
9 Motor 1) Separate the Fan Propeller.
2)
Remove 8ea of screws which are
fixed to Motor. (Use +Screw Driver)
3)
Separate the Motor Wire connector
from the Outdoor Unit Control Part.
10 Bracket Motor 1) Remove 2ea of screws from the
Bracket Motor and separate it.
(Use +Screw Driver)
11 Base Heater
(※ AC024BXADCH
Only)
1) Remove 4ea of screws from the Base
heater and separate it.
(Use +Screw Driver)
2) Separate the Base heater Wire
connector from the Outdoor Unit
Control Part.