Samsung AC024MNADCH/AA - Page 17

Samsung Electronics 3-7
No Parts Procedure Remark
2
CONTORL IN
1) Lossen Sub PBA Wire.
Caution:
When you separate the connector,
pull pressing the locking button.
2) Lossen Stepping Motor, EEV, Display,
Sensor, SPI, Fuse Wire.
Caution:
When you separate the connector,
pull pressing the locking button.
3) Lossen Motor, Terminal Wire.
Caution:
When you separate the connector,
pull pressing the locking button.
4) Loosen Earth Wire.