Why is my Samsung Air Conditioner heating operation restricted?
If the heating operation of your Samsung Air Conditioner is restricted at an outdoor temperature over Theat_high value (default: 30 °C), adjust the outdoor temperature settings.
What to do if my Samsung Air Conditioner has a gas leak?
If your Samsung Air Conditioner has a gas leak, contact an Authorized Service Center for assistance.
What to do if my Samsung AC024MNADCH/AA Air Conditioner displays a fan speed error?
If your Samsung Air Conditioner is showing a fan speed error, contact an Authorized Service Center.
What to do if my Samsung AC024MNADCH/AA shows communication error between indoor unit and outdoor unit?
If there is a communication error between the indoor and outdoor units, especially if there's no response from the indoor units after tracking, contact an Authorized Service Center.
What to do if my Samsung AC024MNADCH/AA Air Conditioner system stops due to discharge temperature?
If your Samsung Air Conditioner system stops due to discharge temperature, contact an Authorized Service Center.
What to do if my Samsung AC024MNADCH/AA has H/W DC_Link Over Voltage Error?
If your Samsung Air Conditioner displays a H/W DC_Link Over Voltage Error, contact an Authorized Service Center.
What to do if my Samsung AC024MNADCH/AA Air Conditioner shows error due to operation failure of inverter compressor?
If your Samsung Air Conditioner shows an error due to the operation failure of the inverter compressor, contact an Authorized Service Center.
What to do if my Samsung AC024MNADCH/AA Air Conditioner system stops due to OLP temperature control?
If your Samsung Air Conditioner system stops due to OLP temperature control, contact an Authorized Service Center.
What to do if my Samsung Air Conditioner shows error due to abnormal rotation of the compressor?
If your Samsung Air Conditioner shows an error due to abnormal rotation or unconnected wire of the compressor, contact an Authorized Service Center.
What to do if my Samsung AC024MNADCH/AA Air Conditioner is not installed smart?
If Smart Install is not installed, install Smart Install.
General| Refrigerant | R410A |
|---|---|
| Cooling Capacity | 24000 BTU/hr |
| Heating Capacity | 24000 BTU/h |
| Noise Level (Indoor) | 24 dB |
| Power Source | Electric |
To Next Page
