Samsung Electronics 3-9
No Parts Procedure Remark
Panel
&
Filter(A type)
6)
Press the left and right hooks on the Panel to
separate Panel from the Indoor Unit.
Panel
&
Filter (B type)
1)
Press the [Filter Reset] button on the Wireless
Remote Controller once. It will make an
induction Panel that is shown in the next
picture slide down.
2)
Spin the 2 connecting levers that link both ends of
the induction Panel and gear as shown in the next
picture.
3)
Push the induction Panel forward to remove it.
To Next Page
Loading...
