Samsung Electronics 3-3
No Parts Procedure Remark
6) Disassemble the bolts that are assembled with
the indoor unit at the 4 panel corners.
7) Press the Hangers at both sides of the panel
inwards, to remove it from the indoor unit’s
hook.
Remove the panel from the indoor unit.
2 Control-Box 1) Disconnect the Connector Wire that is
connected to the indoor unit’s PBA
2) Unscrew the 2 fixed screws on both sides of the
Control Box, and disassemble the Control Box
from the indoor unit.(Use +Screw Driver)
To Next Page
Loading...
