Samsung AC026MN1DKH/EU - Page 57

4-13 Samsung Electronics
Option SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
Explanation PAGE
Individual control of
a remote controller
Heating setting
compensation
RESERVED
Motion detect
sensor
RESERVED
Indication
and
Details
Indication Details Indication Details
0 Disuse
Indication Details
3
0 or 1Indoor 1
0.No Use (Factory Setting)
1. Standard Mode/Auto
Set OFF30 Min.
2. Standard Mode/Auto
Set OFF60 Min.
3. Standard Mode/Auto
Set OFF 120 Min.
4. Standard Mode/Auto
Set OFF 180 Min.
5. Premium Mode/Auto
Set OFF30 Min.
6. Premium Mode/Auto
Set OFF60 Min.
7. Premium Mode/Auto
Set OFF 120 Min.
8. Premium Mode/Auto
Set OFF 180 Min.
2Indoor 2
3 Indoor 3
4Indoor 4
1
2ԕʹ
2 5ԕʹ
X If you input a number other than 0~4 on the individual control of the indoor unit(SEG 20), the indoor is set as
"Indoor 1".
Example) If you want to set as "Exterior temperature sensor : USE, External control : USE, Number of hours using ler :
2000hr", assign option codes except SEG 1, 7, 13, 19 which are page options.
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0 2-10 -
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1 0 ---0
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
210 - 0 6
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
30----
▶
1WAY/2WAY/4WAY MODEL : Drain pump(SEG8) will be set to 'USE + 3minute delay' even if the drain pump is set to 0.
▶
1 WAY/2WAY/4WAY, DUCT MODEL : Number of hours using lter(SEG18) will be set to '1000hour' even if the SEG18 is set to
exept for 2 or 6.
▶
*GZPVJOQVUBOVNCFSPUIFSUIBO_PGUIFJOEJWJEVBMDPOUSPMPGUIFJOEPPSVOJU4&(UIFJOEPPSJTTFUBTJOEPPS
▶
4WAY MODEL : Even when the value of Heating setting compensation(SEG21) is set to '0', it wil be recognized as '5°C'.