3-5
No Parts Procedure Remark
3) Release 2 screws and
pull Bottom Discharge Kit(
ⓖ) out.
4) Disconect the Step Motor wire(
ⓗ) from
the conect wire .
This part is right side of the Bottom
Discharge Kit(
ⓖ).
5) Pull Bottom Discharge Kit(ⓖ) Out
from the bottom of it.
6) Release 3 screws and pull the Evap out
from top to bottom direction.
ⓖ
ⓗ
ⓖ
To Next Page
Loading...
