To Next Page
W
wilsonkatherineSep 5, 2025
What to do if my Samsung Air Conditioner has fan speed error?
- AayersrobinSep 5, 2025
If your Samsung Air Conditioner has a fan speed error, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung Air Conditioner has fan speed error?
If your Samsung Air Conditioner has a fan speed error, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung AC030JXADCH shows an error on the outdoor temperature sensor?
If your Samsung Air Conditioner displays an error on the outdoor temperature sensor (short or open), it requires activities exclusively for Authorized Service Center.
What to do if my Samsung Air Conditioner system stops due to overload protection control?
If your Samsung Air Conditioner system stops due to overload protection control, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung AC030JXADCH is not Smart installed?
If your Samsung Air Conditioner indicates that Smart install is not installed, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung Air Conditioner detects compressor overload prevention?
If your Samsung Air Conditioner detects compressor overload prevention, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung Air Conditioner displays a communication error between the outdoor unit inv and main micom?
If your Samsung Air Conditioner displays a communication error between the outdoor unit inv and main micom (specifically for PF #4~#6 controller, where the error is determined from when the compressor turns on), it requires activities exclusively for Authorized Service Center.
What to do if there is a communication error between Samsung Air Conditioner indoor and outdoor unit?
If you're experiencing a communication error between the indoor and outdoor units of your Samsung Air Conditioner, and tracking has been completed with no response from the indoor units, the solution is to check the electrical connection and settings between the indoor and outdoor units.
What to do if my Samsung Air Conditioner system stops due to full current control?
If your Samsung Air Conditioner system stops due to full current control, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung AC030JXADCH detects reverse phase or open phase?
If your Samsung Air Conditioner detects a reverse phase or open phase, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung AC030JXADCH system stops due to discharge temperature?
If your Samsung Air Conditioner system stops because of the discharge temperature, it requires activities exclusively for Authorized Service Center.
General| Model | AC030JXADCH |
|---|---|
| Capacity (Cooling, Btu/hr) | 30, 000 |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 13.5 kg |
| Weight (Outdoor Unit) | 45 kg |
| Noise Level (Indoor) | 45 dB(A) |
| Operating Voltage | 220-240V |
| Operating Frequency | 50 Hz |
| Power Source | 220-240V/50Hz |
| Cooling Capacity (Ton) | 2.5 |
| Air Flow (Indoor) | 18.5 CMM |
| Dimensions (Indoor Unit) | 845 x 270 x 200 mm |
| Dimensions (Outdoor Unit) | 880 x 638 x 310 mm |
General safety guidelines for installation and operation.
Guidelines and warnings for installing the unit safely.
Safety checks for power supply, fuses, and circuit breakers.
Criteria for choosing an appropriate installation location.
Clearances for installing one outdoor unit.
Clearances for installing multiple outdoor units.
Method for securing the outdoor unit using anchor bolts.
Table of error codes and meanings for the outdoor unit.
