Samsung AC036JB1DEC - Order for Setting Options

Samsung Electronics 4-5
1. If you want to use the various additional functions for your Wired Remote Controller, press the Set and Esc buttons at the
same time for more than three seconds.
Ź
You will enter the additional function settings, and the [main menu] will be displayed.
2. Refer to the list of additional functions for your Wired Remote Controller on the next page, and select the desired menu.
Ź
Using the [
ఴ
]/[
వ
] buttons, select a main menu number and press the [
౔
] button to enter the sub-menu setting screen.
Ź
Using the [
ఴ
]/[
వ
]
buttons, select a sub-menu number and press the [
౔
] button to enter data setting screen.
Ź
When you enter the setting stage, the current setting will be displayed.
Ź
Refer to the chart for data settings.
Ź
Using the [
ఴ
]/[
వ
] buttons, sel
ect the settings. Press the [
౔
] button to move to the next setting.
Ź
Press the Set button to save the settings and exit to the sub-menu setting screen.
Ź
Press the Esc button to exit to normal mode.
t8IJMFTFUUJOHUIFEBUBZPVDBOVTFUIF<౒]/[౔] buttons to set the range of Data bit.
t8IJMFDPOGJHVSJOHUIFTFUUJOHQSFTTUIFEsc button to exit to the setting sub-menu without saving your changes.
4-1-3 Order for Setting Options (Wired Remote Controller)
Main Menu
Sub-menu
1 2 3546
SEGs for Use