Samsung Electronics 3-11
XAC030MNTDCH / AC036MNTDCH
No Parts
Procedure Remark
1 PANEL-FRONT 1) Stop the driving of air conditioner and shut off
main power supply.
2) Open the FRONT-GRILLE and pull out from the
PANEL-FRONT.
3) Detach COVER-TERMINAL from the PANEL
FRONT. (use + Screw Driver)
4) Loosen connector wire(white) and detach the
temperature sensor wire .
5) To detach the FRONT-PANELthe main frame,
unfasten 2 screw at the bottom.(use + Screw
Driver )
6) Take off the FRONT-PANEL,lifting up the bottom
To Next Page
Loading...
