What to do if my Samsung Air Conditioner shows an Indoor and Outdoor unit communication Error?
If your Samsung Air Conditioner displays an Indoor and Outdoor unit communication Error, you should check the connection wire. If the issue persists, consider changing the Main PCB.
What to do if my Samsung Air Conditioner displays an Indoor unit Fan motor Error?
If your Samsung Air Conditioner shows an Indoor unit Fan motor Error, first check the connection wire. If the error continues, you may need to change the Fan motor or the Main PCB. Note that the BLDC Motor is used as a Fan Motor, so always turn off the power before connecting or disconnecting the connector to prevent damage.
What to do if my Samsung AC048KXQPCC Air Conditioner has a Thermal Fuse Error (TERMINAL BLOCK)?
If your Samsung Air Conditioner shows a Thermal Fuse Error (TERMINAL BLOCK), check the connection wire.
What to do if my Samsung AC048KXQPCC displays a No response error of address from indoor unit?
If your Samsung Air Conditioner shows a No response error of address from the indoor unit, check the indoor unit's quantity setting in the outdoor unit. Also, check the electrical connection and setting.
What to do if my Samsung AC048KXQPCC displays an EEPROM ERROR?
If your Samsung Air Conditioner displays an EEPROM ERROR, change the PCB.
What to do if my Samsung Air Conditioner displays an EEPROM Option Setting Error?
If your Samsung Air Conditioner displays an EEPROM Option Setting Error, input the option. Note that you cannot input KEY.
What to do if my Samsung Air Conditioner displays an Indoor unit room temperature sensor SHORT/OPEN error?
If your Samsung Air Conditioner displays an Indoor unit room temperature sensor SHORT/OPEN error, change the temperature sensor (Wire type).
What to do if my Samsung AC048KXQPCC Air Conditioner displays an Indoor unit Eva_in sensor SHORT/OPEN error?
If your Samsung Air Conditioner displays an Indoor unit Eva_in sensor SHORT/OPEN error, change the temperature sensor (Wire type).
What to do if my Samsung AC048KXQPCC displays a Duplicated address setting error?
If your Samsung Air Conditioner displays a Duplicated address setting error, check the address setting of the Indoor units.
General| Model | AC048KXQPCC |
|---|---|
| Energy Efficiency Ratio (EER) | 3.5 |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 12 kg |
| Power Supply | 220-240V, 50Hz |
To Next Page