3-2 Samsung Electronics
No Parts Procedure Remark
1 Panel 1) Pull both hooks and take the grille downward.
Two safety clips are mounted to the front grille to
prevent it from dropping.
2) Detach the safity clip and take up the grille.
3) Remove the 2 fixed screws to remove the
Control-Box Cover. (Use +Screw Driver)
4) Remove the Remocon-Receiver and Blade
Connector Wire from the PBA. (3EA)
5) Push the 4 panel corners and cover downwards
to remove it.
3-1 Indoor unit
■ AC026MNNDKH / AC035MNNDKH / AC052MNNDKH / AC060MNNDKH / AC071MNNDKH
To Next Page
Loading...
