To Next PageTo Next Page
Need help?Do you have a question about the Samsung AC090FCAPEH and is the answer not in the manual?
General| Brand | Samsung |
|---|---|
| Model | AC090FCAPEH |
| Category | Air Conditioner |
| Language | English |
General safety guidelines and warnings for installation and operation.
Safety considerations specific to installing the unit.
Ensuring electrical safety during connection and operation.
Safe methods for moving the outdoor unit using wire ropes.
Choosing an optimal and safe location for the outdoor unit.
Methods and components for securely mounting the outdoor unit.
Specific instructions for installing the unit on a wall using a rack.
Diagrams illustrating wiring for 1-phase and 3-phase systems.
Table detailing power cable requirements based on unit model.
Specifications for 3-phase connections, including voltage and current.
Specifications for common indoor/outdoor connection cables.
Details on terminal block specifications for power connections.
Visual guides for power cable connections using ELB for 1 and 3 phases.
Wiring for DRED and Silence Mode controllers.
Diagrams and procedures for connection cords and power terminals, including torque.
Step-by-step guide on preparing and connecting extended power cables.
Instructions for insulating and protecting cables.
Guidelines for refrigerant pipe lengths and system configurations.
Specifications for refrigerant pipe temper grade and minimum thickness.
Information on regulations and safe handling of refrigerants.
Refrigerant calculation guidelines for single outdoor unit installations.
Refrigerant calculation guidelines for DPM installations.
List of compatible outdoor and indoor units for DPM installation.
Guidelines for space and piping when installing DPM systems.
Instructions for connecting communication lines for DPM.
Details on DPM operation and settings.
Guidance on installing DPM systems.
Using a vacuum pump for system preparation.
Steps for leak testing with nitrogen and R-410A.
Proper insulation of refrigerant pipes to prevent condensation.
Steps to properly open the stop valve.
Steps to properly close the stop valve.
Steps for relocating the air conditioner.
Verifying power supply and indoor unit connections before testing.
Activating various test modes on the outdoor unit.
Accessing system status information using the K4 switch.
Configuring unit functions using DIP switches for various modes.
