Disassembly and Reassembly
Samsung Electronics 3-21
No. Parts Procedure Remark
4 Drain Pump &
Hose
2) Remove 2ea of screws and separate
the Drain Hose that is on the side
lower part of Indoor Unit.
(Use +Screw Driver)
5 Fan & Motor 1)
Remove the hex nut which is fixed to top of
Fan and separate the Fan from the Motor.
(Use Monkey Spanner)
2) Remove the 3 hex nuts which is fixed
to Motor and separate the Motor from
the Indoor Unit.
(Use Monkey Spanner)
6 Temperature
Sensor
1) Remove 6ea of screws which are
fixed to Evaporator and separate the
Partition.
2) Separates the Temperature Sensor
which is fixed to Evaporator Pipe with
the fixing clip together by the hand.
To Next Page
Loading...
