Disassembly and Reassembly
3-22 Samsung Electronics
No. Parts Procedure Remark
7 Evaporator 1) Remove 2ea of screws which are
fixed to Indoor Unit and separate the
Evaporator fixing bracket.
(Use +Screw Driver)
2) Remove a screw which is fixed to
Indoor Unit and pull the hook and then
separate the Drain Cover.
(Use +Screw Driver)
When assemble, be careful with the
interference structure of piping
projecting p
3) Separate the Evaporator from the
Indoor Unit.
If you remove the Evaporator with
bare hands, it may injure your hands,
gloves must be worn.
To Next Page
Loading...
