To Next PageTo Next PageHow to fix temperature sensor error in Samsung Air Conditioner?
If you are experiencing a temperature sensor error (OPEN/SHORT) in the indoor unit of your Samsung Air Conditioner, try performing a power reset.
What to do if Samsung AJ040MCJ2EH/EU Air Conditioner shows indoor fan motor error?
If your Samsung Air Conditioner displays an error indicating the indoor fan motor speed is below 450RPM for 15 minutes, try performing a power reset.
What to do if Samsung Air Conditioner displays a float switch error?
If your Samsung Air Conditioner is showing a float switch error, try performing a power reset of the unit.
How to resolve Samsung AJ040MCJ2EH/EU Air Conditioner option switch error?
If your Samsung Air Conditioner displays an error related to setting option switches for optional accessories, try performing a power reset.
How to fix EEPROM error on Samsung AJ040MCJ2EH/EU Air Conditioner?
If your Samsung Air Conditioner is showing an EEPROM error, try performing a power reset.
General| Type | Split System |
|---|---|
| Technology | Inverter |
| Cooling Capacity | 4.0 kW |
| Heating Capacity | 4.5 kW |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
| EER | 3.21 |
| COP | 3.61 |
Essential guidelines for safe and correct installation of the air conditioner.
Rules for proper power connection and circuit breaker usage to prevent hazards.
Safe usage guidelines and precautions to follow during the air conditioner's operation.
Step-by-step procedure for disassembling the outdoor unit.
How to interpret error codes displayed on the unit or remote control.
Error codes and explanations specific to the outdoor unit.
Procedures for setting indoor unit addresses and installation options.
Initial troubleshooting steps for outdoor units that are not receiving power.
Steps to diagnose and fix errors related to the outdoor unit fan.
Troubleshooting common compressor operational issues.
Diagnosing and resolving IPM overcurrent errors.
Procedures for connecting refrigerant lines and purging air from the system.
Steps for refilling refrigerant after leaks or during installation.
