Disassembly and Reassembly
3-22 Samsung Electronics
No Parts Procedure Remark
2)
Disassemble the Bracket Outlet Sub that fixes
the Drain Pan equipped on the front of the
set.
– Unscrew 6 screws
3)
Disassemble the Drain Cushion from the
set.
3 Ass'y Evap
The Evaporator should be disassembled
after disassembling the Cover Control 1-3)
and the Drain Pan 2-1), 2-2), 2-3).
1) Disassemble the Cover Pipe that fixes the
high/low pressure Pipe.
– Unscrew 2 screws
2)
Disassemble the refrigerant temperature sen-
sor, Inlet air temperature sensor, and EEV wire
that connected to the inside of PCB.
To Next Page
Loading...
