Disassembly and Reassembly
Samsung Electronics 3-23
No Parts Procedure Remark
3)
Disassemble the Support Evap. LF that fixes
the Evaporator.
– Unscrew 2 screws
4)
Disassemble the Support Evap RH.
– Unscrew 2 screws
5)
Disassemble the Evaporator form the set.
4 Ass'y Control In
The Control In should be disassembled
after disassembling the Cover Control
1-3).
1) Disassemble all Control Wires connected to
the inside of PCB.
2)
In case of disassembling the PCB separately,
disassemble the PCB from the case with push-
ing the hook after unscrewing the screw.
– Unscrew 1 screw
To Next Page
Loading...
