Samsung AM012HNQDCH/AA - Page 133

Disassembly and Reassembly
Samsung Electronics 3-73
No Parts Procedure Remark
2
CONTORL IN
1) Lossen Sub PBA Wire.
When you separate the connector,
pull pressing the locking button.
2) Lossen Stepping Motor, EEV, Display,
Sensor, SPI, Fuse Wire.
When you separate the connector,
pull pressing the locking button.
3) Lossen Motor, Terminal Wire.
When you separate the connector,
pull pressing the locking button.
4) Loosen Earth Wire.