Disassembly and Reassembly
3-140 Samsung Electronics
No. Parts Procedure
Remark
4
Evaporator
1) Remove the screws which is fixed to Indoor Unit
and separate the Evaporator fixing bracket. (Use
+Screw Driver)
2) Remove screws which is fixed to Indoor Unit
and pull the hook and then separate the Drain
Cover. (Use +Screw Driver)
When assemble, be careful with the interference
structure of piping
projecting part.
3) Separate the Evaporator from the Indoor Unit.
If you remove the Evaporator withbare hands, it
may injure your hands, gloves must be worn.
To Next Page
Loading...
