Samsung AM012KNQDCH/AZ - Page 190

Disassembly and Reassembly
3-130 Samsung Electronics
No Parts Procedure Remark
2) Unfasten the screw at the left side.
(use + ScrewDriver)
3)
Detach the HOLDER PIPE.
(use + Screw Driver)
4)
Detach the BRACKET-EVAP.
(use + Screw Driver)
5)
Detach the HOLDER EVAP.
(use + Screw Driver)
6)
Loosen 1 fixing earth screw right side.
(use + Screw Driver)