Samsung AM022FNQDEH/TK - Using the Turbo Function; Selecting an Indoor Unit

24
Using the Turbo function
You can set the Turbo function to provide fast and powerful cooling (heating).
When the air conditioner is operating in Cool or Heat mode;
Remote controller display
1. Press the Options button.
2. Press the <, > or Options button until (Turbo) indicator starts to blink.
3. Press the SET button to set the Turbo function.
- (Turbo)

(Turbo) indicator will be displayed on the remote controller display
and Turbo function will operate for 30 minutes.
Cancel
f
Press the Options button

press the <, > or Options button to
make the (Turbo) indicator blink and press the SET button.
• Turbo function is only available in Cool/Heat mode.
• If the Turbo function is selected while Quiet function is on, the Quiet
function will be cancelled.
• Air flow direction can be adjusted with every direction.

Duct type model cannot adjust air flow direction up and down.
• Temperature and fan speed cannot be adjusted.
NOTE
Selecting an indoor unit
You can select and operate individual indoor units out of 4 indoor units.
When the air conditioner is turned on
Remote controller display
1.
Press the Settings button.
2. Press the <, > or Settings button until (Zone) indicator starts to blink.
3. Press the SET button to select the indoor unit you want to operate.
- You can select individual units in order (1~4) or select all indoor units at
one time.

Before Selectiing an Indoor unit ,you need setting indoor zone .Reference
installation manual 02 series installation option.