19
Cleaning and MaintenanceCleaning and Maintenance
Cleaning the Wind-Free panel
Clean the Wind-Free panel at least once a month.
1 Pull the airflow blade open.
2 Hold and pull both sides of the Wind-Free panel until it comes free from the air conditioner.
3 Use a soft brush or vacuum cleaner to remove any dust.
4 Hang the Wind-Free panel in the grooves at the bottom left and right.
5 Align the projections of the Wind-Free panel with the grooves at the top, middle, and bottom of the
front panel.
6 After inserting the Wind-Free panel, press the top 4 places and the bottom 3 places by hand so that
there is no gap to the panel.
CAUTION
• If you attach the Wind-Free panel without the airflow blade being open, it may become obstructed by
the Wind-Free panel and may not open properly.
DB68-08961A-00_IB_DVM QMD_EU_EN_.indd 19 2020-02-07 오전 9:19:41
To Next Page
Loading...