No Parts Procedure Remark
10 Bracket Motor 2) Unscrew and remove 1 mounting screws
in Assy bracket valve. (Use + Screw Driver.)
3) Unscrew and remove 2 mounting screws
in Bracket accume. (Use + Screw Driver.)
4) Separate the Assy TUBE 4way-accumulator.
13 Compressor 1) As shown in the picture, unscrew and
remove 4 mounting screws from the bottom.
(Use L-Wrench or Monkey Spanner or
Socket Wrench)
To Next Page
Loading...
