Samsung Electronics 17
No Parts Procedure Remark
12 Ass'y Tube EEV 1) Purge the Coolant first.
2) Separate 2 parts of the pipe using a welder.
When removing the compressor,
Heat Exchanger and Pipe, purge the
refrigerant inside the Compressor
completely and remove the pipe with
a welding flame.
13 Ass'y Tube Suction 1) Separate 2 parts of the pipe using a welder.
14 Ass'y Tube 4Way 1) Unscrew and remove 2 mounting screws
in Oil Separator. (Use + Screw Driver.)
2) Separate 2 parts of the pipe using a welder.
To Next Page
Loading...
