93
Chapter 3.
Settings and Upgrade
Changing the Boot Priority
By default, the highest boot priority device is set to the CD-ROM/
DVD drive. As an example, the procedures to change the highest
boot priority device to the hard disk drive are described below.
The screen images and terms may di er from actual product
depending on the computer model and driver version.
1
Select the Boot menu in the BIOS Setup.
2
Press <Enter> on the Boot Device Priority item.
3
Press the down key (
↓
) to move to the SATA HDD item and
press the F6 key to move up to the top item.
4
Press the F10 key to save the settings and exit Setup.
The highest boot priority device is now set to the Hard Drive.
To Next Page
Loading...
Need help?
General