Samsung AN JSKLKN Series - Cleaning the Dust Filter

Cleaning the Dust Filter
AN026✴✴
Clean the dust lters at least twice a year. However, cleaning cycle may vary according to the period of use and condition of
the ventilator. Clean the dust lters more frequently in dusty place. Make sure that the power supply is disconnected before
cleaning the ventilator.
1. Remove 3 screws on the maintenance cover.
2. Take o the maintenance cover from the ventilator.
Screw
3. Detach the dust lters by pulling them forward.
f There are totally 2 dust lters on both sides of the heat exchange element.
Dust lter
4. Remove all dust on the dust lters with a vacuum cleaner or a brush.
5. Reassemble the dust lters and the maintenance cover.
f Make sure to insert the dust lters correctly. The heat exchange element may be covered with dust decreasing the
eciency.
t Change the dust lters every two years. However, changing cycle may vary according to the used period and
condition.
t If the dust lter is damaged, you can buy a replacement from your supplying agent or customer care center.
t Make sure to turn o the sub power supply.
NOTE
ENGLISH-14