Samsung AQ09T Series - Timer Functions; Setting On;Off Timers and Options

14
Setting the On/O timer
You can set the air conditioner to turn on/o automatically at desired time.
Setting On timer while the air conditioner is o / O timer while the air conditioner is on
1. Press the On Timer/O Timer button.
 
On/O timer indicator will blink on the remote controller display.
2. Press the Time Up or Time Down button to set the time.
 
You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from
3 hours ~ 24 hours.
 
Operating hour can be set from minimum 30 minutes to maximum 24 hours.
3. Press the Set button to active it on.
 
On timer indicator stops blinking and reserved time will be displayed for
3 seconds.
 
If you don’t press Set button within 10 seconds after selecting the time the air
conditioner will return to previous status. Check On timer or O timer indicator and
indicator on the indoor unit.
Additional options available in On timer mode
You can select from Auto/Cool/Dry/Fan/Heat.
You can adjust the fan speed in Cool/Fan/Heat mode.
You can adjust the temperature in Auto/Cool/Dry/Heat mode.
• OnlythelatestsettingtimerwillbeappliedbetweentheOnTimer/OTimer
and
O timer functions.
• Aftersettingthetimer,thesettimewillbedisplayedfor3secondsbeforeit
disappears.
Setting On timer
Setting O timer
Press the Cancel button.Cancel
Boracay EUR_AQ09T&U@_IBIM_32447A_E.indd 14 2011-3-19 10:07:47