Samsung AQ09T Series - Auto Clean Function; Auto Clean Operation Guide

16
Using the Auto Clean function
Auto clean function will prevent from growing mold by eliminating the moisture inside of the indoor unit. Your indoor unit
evaporates the moisture inside of the unit. Activate this function to provide you with more clean and healthier air.
Press the Auto Clean button.
Press the
• Whentheairconditioneristurnedon,theAutocleanfunctionrunsafter
stopping the air conditioner operation.
When the air conditioner is turned o ,

The Auto clean indicator on the indoor unit display appears and the Auto cleaning
function runs.
When the air conditioner is turned on,

After stopping the air conditioner operation, the Auto clean indicator on the indoor unit
display appears and the Auto cleaning function runs.
Press the Auto Clean button once again. Cancel
※

Auto Cleaning time can vary, depending on the previously used mode.
Auto(cool), Cool, Dry mode:approximately30minutes.
Auto(heat), Heat, Fan mode:approximately15minutes.
 09/12/18/24T 

09/12/18/24U 
Boracay EUR_AQ09T&U@_IBIM_32447A_E.indd 16 2011-3-19 10:07:49