To Next PageTo Next Page
Need help?Do you have a question about the Samsung AQV09AWAN and is the answer not in the manual?
General| Type | Split system |
|---|---|
| Compressor type | Rotary |
| Remotely operated | Yes |
| Cooling capacity (max) | 8530 BTU/h |
| Heating capacity (max) | 11942 BTU/h |
| Air conditioner functions | cooling, heating |
| Cooling capacity in watts (max) | 2500 W |
| Heating capacity in watts (max) | 3400 W |
| Cooling energy efficiency (EER, W/W) | 15 |
| Heating energy efficiency (COP, W/W) | 4.3 |
| Indoor unit type | Wall-mountable |
| Indoor unit weight | 10200 g |
| Indoor unit noise level (high speed) | 31 dB |
| Outdoor unit weight | 32600 g |
| Outdoor unit noise level | 45 dB |
| Airflow | 480 m³/h |
| Power requirements | 220 - 240V, 50Hz |
| Power consumption (cooling) (max) | 581 W |
| Power consumption (heating) (max) | 791 W |
Weight and Dimensions| Dimensions (WxDxH) | 900 x 185 x 304 mm |
|---|
Guidelines for safe and effective service, including part usage, harness repair, and assembly checks.
Warnings regarding static electricity risks when handling PCBs and maintaining distance from other electronic devices.
Essential safety measures to prevent electric shock or fire during operation and maintenance.
Step-by-step guide to entering option setup mode and configuring unit settings via the remote control.
Lists common error codes (E101, E121, etc.), their causes, and recommended follow-up measures.
Troubleshooting steps for communication errors between indoor and outdoor units (E101/E102).
Diagnosing and resolving indoor temperature sensor errors (E121) by checking resistance and voltage.
Troubleshooting steps for heat exchanger sensor errors (E122), involving resistance and voltage checks.
Resolving indoor fan motor speed errors (E154) by inspecting connections, voltage, and relay operation.
Diagnosing outdoor temperature sensor errors (E221) through connection, resistance, and pull-up checks.
Troubleshooting steps for coil temperature sensor errors (E237), checking connection, resistance, and pull-up.
Troubleshooting steps for units with no power, checking voltage and regulator ICs.
Diagnosing outdoor unit power supply errors by checking voltage, fuses, and PCB connections.
Resolving issues where the unit operates in the wrong heating or cooling mode.
