95
10-2-3 Indoor fan motor speed detecting error (BLDC fan)
Indoor display
3-LED DISPLAY
7-SEG DISPLAY DESCRIPTION
LED1 LED2 LED3
◎
E154 Indoor fan error
●
LED ON
◎
LED BLINKING
LED OFF
1. Checklist :
1) Is the indoor units fan motor properly connected with the connector(CN72)?
2) Is the AC voltage correct?
2. Troubleshooting procedure
Restart after power off.
Does the fan rotate?
Power o and Separate the Fan motor wire
from CN72 on Indoor PBA
Is there short among
eachpin#1~#6?
Reassemble the fan wire and input the power again
Is the fan error appeared again?
Terminate the
service
Exchange the Fan
motor
Follow the check procedure of Indoor unit
power supply error check
Exchange the Indoor PBA
IsthevoltageofCN72#1-#3over250Vdc?
Is the voltage of CN72
#3-#5and#3-#6within1Vdc~15Vdcduring
the operation?
PBA problem or Motor problem
ChangethePBArstandchecktheoperation
Exchange the Fan motor