Disassembly and Reassembly
3-4 Samsung Electronics
SAMSUNG PROPRIETARY. DO NOT COPY OR DISTRIBUTE WITHOUT PERMISSION
SAMSUNG PROPRIETARY. DO NOT COPY OR DISTRIBUTE WITHOUT PERMISSION
No Parts Procedure Remark
4) Detach several connectors from the PCB
of Ass'y Control Out.
5) Loosen 2 screws (CCW) fixed to assemble
Ass'y Control Out with Partition.
(Use +Screw Driver.)
3 Fan
&
Motor
1) Loosen the fixing nut (CW) and detach
the Fan.
(Use Monkey Spanner.)
2) Loosen 4 fixing bolts and detach the
Motor. (Use +Screw Driver.)
3) Loosen 2 fixing screws and detach the
Bracket Motor. (Use +Screw Driver.)
4 Heat Exchanger
&
Compressor
1) Release the refrigerant at first.
2) Disassemble the Inlet and Outlet Pipe by
welding.
3) Loosen the fixing 3 screws of the
Heat Exchanger. (Use +Screw Driver.)
4) Detach the Heat Exchanger.
Befor you disassemble the pipes and
Condensor, be sure that there should be
no refrgerant remained in the unit.
5) Loosen 3 nuts of the Compressor.
(Use Monkey Spanner.)
6) Detach the Compressor.
To Next Page
Loading...