To Next PageTo Next Page
Need help?Do you have a question about the Samsung AR18CSDABWKN and is the answer not in the manual?
General| Brand | Samsung |
|---|---|
| Model | AR18CSDABWKN |
| Category | Air Conditioner |
| Language | English |
Detailed technical specifications for various indoor unit models, including capacity, noise, and power consumption.
Technical specifications for different types of Samsung indoor air conditioning units (Wall-mounted, Cassette).
Detailed technical specifications for Samsung Free Joint Multi outdoor units, covering performance and physical attributes.
Step-by-step procedures for disassembling the outdoor unit, including necessary tools and safety precautions.
Guide to interpreting LED displays for various abnormal conditions in indoor units and associated error codes.
Detailed table showing abnormal conditions, LED lamp displays, and remarks for AC***BN1DCH indoor units.
Lists self-diagnostic routines for outdoor unit PCBs, identifying error codes and their explanations.
A checklist of initial checks for common operational issues, focusing on voltage, connections, and basic functions.
Diagnosing common indoor unit faults by symptom, including temperature sensor and fan errors.
Detailed fault diagnosis for indoor units, covering temperature sensor issues and fan errors.
Troubleshooting steps for indoor unit FAN errors, focusing on motor connector and foreign substance checks.
Troubleshooting guide for communication errors between indoor and outdoor units after tracking, including PCB response checks.
Troubleshooting for indoor unit FAN errors related to EEPROM circuit failures, including PCB inspection and replacement.
Initial diagnostic steps for outdoor units that are not powering on, checking voltage, connections, and component status.
Procedures for checking DC voltages on various points of the outdoor unit's controller and inverter PBA.
Diagnostic steps for outdoor unit fan errors, checking voltage, resistance, and motor connections.
Troubleshooting for compressor startup, lock, and rotation errors, including resistance checks and PCB diagnosis.
Diagnostic steps for IPM over-current errors, checking fan, voltage, resistance, and component status.
Steps to check temperature sensors, including connection, placement, resistance, and voltage readings.
