Troubleshooting
Samsung Electronics 4-29
SAMSUNG PROPRIETARY. DO NOT COPY OR DISTRIBUTE WITHOUT PERMISSION
SAMSUNG PROPRIETARY. DO NOT COPY OR DISTRIBUTE WITHOUT PERMISSION
4-3-5 Changing the addresses and option individually
When you want to change the value of a specific option, refer to the following table and follow the steps in
Common steps for setting the addresses and options on page 18.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Function Page Mode
Type of the option to
change
Tens position of the
option number
Units position of the
option number
New value
Indication and
details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0 D Option type 0 to F
Tens
position
value
0 to 9
Units
position
value
0 to 9 New value 0 to F
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Function Page Mode
Type of the option to
change
Tens position of the
option number
Units position of the
option number
New value
Indication 0 D 2 1 7 1
• If your indoor units support both cooling and heating, the mixed operation (two or more indoor units operate in
different modes simultaneously) is not available when the indoor units are connected to the same outdoor unit.
If you set an indoor unit as the master indoor unit by using the remote control, the outdoor unit automatically
operate in the current mode of the master indoor unit.
CAUTION
To Next Page
Loading...