Samsung AR18CSFCMWKNCV - Page 25

25
NO. Parts Procedure Remark
1 PANEL-FRONT 5)TheGRILLEINLETisxedto
body by hooks in the center and
side area.
6) Separate the hook pulling end
of the GRILLE INLET as shown in
gures.(Watchoutforthedamage
of hooks)
7) To detach the PANEL FRONT
from the main frame, unfasten
2screwsatthebottom.(use(+)
Screw Driver)
8) To detach the PANEL FRONT
from the main frame, loosen 4
hook structures.
When separate the hooks: pull
out each ribs near the hooks as
showningures.(Watchoutfor
the damage of hooks)