Samsung AR18CSFCMWKNCV - Page 30

30
NO. Parts Procedure Remark
4 EVAPORATOR 20)TheHOLDERPIPEisxed
to body by 2 hooks as shown in the
gure.
21) To detach the HOLDER PIPE
from the main frame,loosen 2 hook
structhres.
When separate hooks: Use the (-)
Screw Driver. Insert the (-) Screw
Driver into the gap of the hook
and lean to the Moter side as
showningures.(Watchoutfor
the damate of hooks)
22)Remove the HOLDER PIPE.
23)Unfasten a screw of the Fan
Moter side.
(Use(+)ScrewDriver.)
24)Unfasten 2 screws of the
opposite side of the Fan Moter.
(Use(+)ScrewDriver.)