Samsung AR18CSFCMWKNCV - Page 50

50
No. Parts Procedure Remark
13 EEV Valve 1) Remove the 2 screws which
isxedtoServiceValveand
separate it. (Use
+ScrewDriver)
2)Separate the inlet and outlet
pipes by welding torch.
14 Compressor 1)Removethe1xingnutfrom
the end of Cover and separate it.
(Use Hexagon Wrench, Monkey
Spanner, Hexagon Socket)
2) Separate the Felt Compressor.
3) Remove the 3 bolts from
the bottom of Compressor like
the picture on the right side.
(Use Hexagon Wrench, Monkey
Spanner, Hexagon Socket)
15 Condenser
Connection Part
1) Remove the 3 screws which is
xedtoeachsideofCondenser
Connection Part and separate it.
(Use+ScrewDriver)