3-6 Samsung Electronics
Step 4
Pressing the ON/OFF button ( ) .
When pressing the operation ON/OFF key with the direction of remote control for unit, the sound ’’Ding’’ or ’’Diriring’’ is heard
and the OPERATION ICON(
) lamp of the display is flickering at the same time, then the input of option is completed.
(If the deriving sound isn’t heard, try again pressing the ON/OFF button.)
Press the Mode Selection key to set the display part and check the display part.
→
The display part shows like below when each time you press Mode button.
Step 3
Upon completion of the selection, check you made right selections.
To Next Page
Loading...