Samsung AR18HSFSJWKX - Checking the Power Consumption; Power Consumption Display; Resetting the Filter Clean Reminder; Filter Clean Reminder Reset

Resetting the Filter clean reminder
When Filter clean reminder ( ) lights up on the indoor unit display, clean the lter and reset the reminder by following this
instruction.
Indoor unit display
1. Press the Settings button.
2. Press the
, or Settings button until (Filter Reset) indicator starts to blink.
3. Press the SET button to reset Filter clean reminder.
- 3 seconds after setting Filter clean reminder function, (Filter Reset) indicator
on the remote controller display will disappear and (
) indicator on the indoor
unit display will disappear.
(AR77JS/HSSD77)
(AR77HSFSJWK77)
Checking the power consumption
This function will display the amount of electricity consumed by operating the air conditioner.
When the air conditioner is operating;
Indoor unit display
1. Press the Settings button.
2. Press the
, or Settings button until (Usage) indicator starts to blink.
3. Press the SET button to check the power consumption.
- 3 seconds after setting power consumption checking function, (Usage) indicator
on the remote controller will disappear.
- Indoor unit will display the amount of Power consumption for few seconds and
then return to usual status by displaying the set indoor temperature.
- Power consumption will be calculated from the moment the air conditioner is
turned on and calculated value will be reset when the air conditioner turns o.
- 0.1 is the default value of the electricity consumption and 99 is the maximum
value. Unit is in kWh.
t When the air conditioner is not operating, power consumption will not
be displayed on the indoor unit display.
AR77JS/HSSD77
AR77HSFSJWK7
English-26
AR5000&A3050 CV HP_IB&IM_DB68-04937A_EN.indd 26 2015/1/4 11:48:06