Need help?Do you have a question about the Samsung AR24HSFSJWKX and is the answer not in the manual?
General| Type | Split Air Conditioner |
|---|---|
| Cooling Capacity | 24000 BTU/h |
| Compressor Type | Rotary |
| Power Supply | 220-240V, 50Hz |
| Outdoor Unit Dimensions (WxHxD) | 880 x 638 x 310 mm |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Noise Level (Outdoor Unit) | 54 dB |
| Features | Auto Clean, Sleep Mode, Turbo Mode |
Explains 2-step, Fast, and Comfort cooling/heating modes for user comfort.
Details Single User, Easy Filter, good'sleep, Smart Install, and Easy Installation.
Explains key safety symbols and general precautions for safe operation.
Critical warnings and guidelines for safe installation procedures.
Specifies operating ranges and checks before using the unit.
Details internal protections and periodic maintenance tasks.
Identifies the main physical components of the indoor unit.
Explains the indicators and symbols on the indoor unit display.
Describes the function of each button on the remote controller.
Explains the various icons and information shown on the remote controller's screen.
Instructions on how to adjust the vertical direction of airflow.
Instructions on how to adjust the horizontal direction of airflow.
Step-by-step guide to setting the timer for the unit to turn on automatically.
Step-by-step guide to setting the timer for the unit to turn off automatically.
Details how temperature and fan speed automatically adjust during the sleep cycle.
How to activate the fast cooling/heating function for quick results.
How to activate the comfort cooling/heating function for mild air spread.
How to use the single user mode to reduce energy consumption.
How to activate the quiet mode to reduce operating noise.
How to activate auto clean to minimize moisture inside the indoor unit.
How to mute or enable beep sounds from the indoor unit.
How to display the amount of electricity consumed by the air conditioner.
Steps to reset the filter reminder after cleaning.
How to adjust the display lighting or turn it off.
Instructions for connecting and controlling the air conditioner via a smart app.
Instructions for cleaning the interior components of the air conditioner.
Guidance on cleaning the heat exchanger of the outdoor unit to maintain performance.
Steps to safely remove the air filter from the unit for cleaning.
Methods for cleaning the air filter effectively, including washing.
A chart outlining regular checks and cleaning tasks for maintaining the unit.
Addresses common problems like unit failure or incorrect temperature control.
Solves issues related to air quality, filter blockage, and airflow direction.
Resolving problems with fan speed, remote controller, and timer settings.
Solutions for indicator lights, odors, errors, noise, smoke, or water leakage.
Important general information, reading the manual, and product compliance.
Essential safety precautions related to the installation process and unit handling.
Criteria for selecting an appropriate location for the indoor unit.
Safety standards and requirements for the power supply and circuit breaker.
Lists the accessories included with the indoor unit for installation and operation.
Lists the accessories supplied with the outdoor unit.
Details optional accessories and lists general and test operation tools.
Steps for preparing the wall plate, including drilling the correct hole for pipes.
Attaching the indoor unit to the installation plate securely.
Details the required wire types, AWG, and cross-sectional area for power connections.
Instructions for making electrical and earth connections according to standards.
Steps for preparing and connecting refrigerant pipes, including torque specifications.
Instructions for evacuating inert gas from the indoor unit pipes before connection.
How to correctly cut pipes and prepare edges for flaring.
How to route and connect the drain hose for proper indoor unit water drainage.
Procedures for changing the drain hose direction and checking for leaks.
Connecting the drain hose to the outdoor unit for condensate drainage.
Essential steps for removing air from refrigerant pipes to prevent compressor damage.
Detailed instructions on using manifold gauges and vacuum pumps for evacuation.
Guidelines for adding refrigerant based on pipe length and unit model.
Procedures for checking gas leaks using nitrogen and leak detectors.
Steps for collecting system refrigerant into the outdoor unit before disconnection.
Insulating pipes and carefully placing the indoor unit onto the installation plate.
Instructions for installing the outdoor unit levelly on a stable base and using brackets.
How to initiate the Smart Install mode for checking installation status.
Monitoring the progress of the Smart Install mode and understanding its indicators.
Interpreting error codes displayed during Smart Install and measures to fix them.
Final checks on installation aspects like tightness, wiring, and drainage before operation.
Steps to perform a trial run to ensure the air conditioner operates correctly.
Lists necessary items and steps for safely extending the power wiring.
Instructions for attaching and wiring the Sub PCB for advanced control options.
Details the parts and wiring connections for installing a wired remote controller.
To Next Page